EB117-204-Ruger-Encore-Barrel-01-kws #EB117 204 Ruger Encore Barrel
#EB117 204 Ruger Encore Barrel
#EB117 204 Ruger Encore Barrel

#EB117 204 Ruger Encore Barrel
Built by Dave Van Horn. These barrels are New Old Stock. Some have been on the shelf and, traveling back and forth to gun shows for several years. The lugs are welded on with stainless steel rod, the welds may have incomplete bluing, based on how the fill rod mixed with the base metal. It does not mean the barrel was incorrectly blued. T/C frames vary slightly over their 40+ year production. We test fit all barrels on our frame(s) for correct fit and function. In rare cases, you may need to perform minor fitting of this barrel to your frame.
#EB117 204 Ruger Encore Barrel
Encore-Forend-Screws-with-Washers-Torx-Drive-8-40-For-T-C-Thompson-Center-01-kti Encore Forend Screws with Washers Torx Drive 8-40 For T/C Thompson Center
Encore Forend Screws with Washers Torx Drive 8-40 For T/C Thompson Center
Encore Forend Screws with Washers Torx Drive 8-40 For T/C Thompson Center

Encore Forend Screws with Washers Torx Drive 8-40 For T/C Thompson Center
New Carbon Steel Encore Forend Screws with. T/C Thompson Center Arms. These are for Tapered Rifle & Pistol Barrels that require two DIFFERENT LENGTH 8-40 screws. These are new, Fillister Head, hardened, stainless steel gun screws. These Screws have Torx style heads that are much easier to install and remove than slotted or phillips head screws. Great when changing barrels! This is a set of two screws with washers, as pictured. Thompson Center recommends the use of washers when installing forends. They will fit factory forends and most aftermarket forends that require a two DIFFERENT LENGTH screws of 7/16″ and 3/4″ lengths. Check the forend screw holes in your barrel. If the front hole is shorter than the rear hole you need the screw set with one long and one short screw. If both holes are the same depth then it requires two of the same length screws, which I also have available. To see all of my screw listings. Please note that the Encore Pro-Hunter, shotgun barrels and 209 x 50 barrels require a different screw set. (stock, forestock, fore stock, forend, fore end, foreend).
Encore Forend Screws with Washers Torx Drive 8-40 For T/C Thompson Center